scala-glm: Regression modelling in Scala

Introduction

As discussed in the previous post, I’ve recently constructed and delivered a short course on statistical computing with Scala. Much of the course is concerned with writing statistical algorithms in Scala, typically making use of the scientific and numerical computing library, Breeze. Breeze has all of the essential tools necessary for building statistical algorithms, but doesn’t contain any higher level modelling functionality. As part of the course, I walked through how to build a small library for regression modelling on top of Breeze, including all of the usual regression diagnostics (such as standard errors, t-statistics, p-values, F-statistics, etc.). While preparing the course materials it occurred to me that it would be useful to package and document this code properly for general use. In advance of the course I packaged the code up into a bare-bones library, but since then I’ve fleshed it out, tidied it up and documented it properly, so it’s now ready for people to use.

The library covers PCA, linear regression modelling and simple one-parameter GLMs (including logistic and Poisson regression). The underlying algorithms are fairly efficient and numerically stable (eg. linear regression uses the QR decomposition of the model matrix, and the GLM fitting uses QR within each IRLS step), though they are optimised more for clarity than speed. The library also includes a few utility functions and procedures, including a pairs plot (scatter-plot matrix).

A linear regression example

Plenty of documentation is available from the scala-glm github repo which I won’t repeat here. But to give a rough idea of how things work, I’ll run through an interactive session for the linear regression example.

First, download a dataset from the UCI ML Repository to disk for subsequent analysis (caching the file on disk is good practice, as it avoids unnecessary load on the UCI server, and allows running the code off-line):

import scalaglm._
import breeze.linalg._

val url = "http://archive.ics.uci.edu/ml/machine-learning-databases/00291/airfoil_self_noise.dat"
val fileName = "self-noise.csv"

// download the file to disk if it hasn't been already
val file = new java.io.File(fileName)
if (!file.exists) {
  val s = new java.io.PrintWriter(file)
  val data = scala.io.Source.fromURL(url).getLines
  data.foreach(l => s.write(l.trim.
    split('\t').filter(_ != "").
    mkString("", ",", "\n")))
  s.close
}

Once we have a CSV file on disk, we can load it up and look at it.

val mat = csvread(new java.io.File(fileName))
// mat: breeze.linalg.DenseMatrix[Double] =
// 800.0    0.0  0.3048  71.3  0.00266337  126.201
// 1000.0   0.0  0.3048  71.3  0.00266337  125.201
// 1250.0   0.0  0.3048  71.3  0.00266337  125.951
// ...
println("Dim: " + mat.rows + " " + mat.cols)
// Dim: 1503 6
val figp = Utils.pairs(mat, List("Freq", "Angle", "Chord", "Velo", "Thick", "Sound"))
// figp: breeze.plot.Figure = breeze.plot.Figure@37718125

We can then regress the response in the final column on the other variables.

val y = mat(::, 5) // response is the final column
// y: DenseVector[Double] = DenseVector(126.201, 125.201, ...
val X = mat(::, 0 to 4)
// X: breeze.linalg.DenseMatrix[Double] =
// 800.0    0.0  0.3048  71.3  0.00266337
// 1000.0   0.0  0.3048  71.3  0.00266337
// 1250.0   0.0  0.3048  71.3  0.00266337
// ...
val mod = Lm(y, X, List("Freq", "Angle", "Chord", "Velo", "Thick"))
// mod: scalaglm.Lm =
// Lm(DenseVector(126.201, 125.201, ...
mod.summary
// Estimate	 S.E.	 t-stat	p-value		Variable
// ---------------------------------------------------------
// 132.8338	 0.545	243.866	0.0000 *	(Intercept)
//  -0.0013	 0.000	-30.452	0.0000 *	Freq
//  -0.4219	 0.039	-10.847	0.0000 *	Angle
// -35.6880	 1.630	-21.889	0.0000 *	Chord
//   0.0999	 0.008	12.279	0.0000 *	Velo
// -147.3005	15.015	-9.810	0.0000 *	Thick
// Residual standard error:   4.8089 on 1497 degrees of freedom
// Multiple R-squared: 0.5157, Adjusted R-squared: 0.5141
// F-statistic: 318.8243 on 5 and 1497 DF, p-value: 0.00000
val fig = mod.plots
// fig: breeze.plot.Figure = breeze.plot.Figure@60d7ebb0

There is a .predict method for generating point predictions (and standard errors) given a new model matrix, and fitting GLMs is very similar – these things are covered in the quickstart guide for the library.

Summary

scala-glm is a small Scala library built on top of the Breeze numerical library which enables simple and convenient regression modelling in Scala. It is reasonably well documented and usable in its current form, but I intend to gradually add additional features according to demand as time permits.

Advertisements

Calling R from Scala sbt projects using rscala

Overview

In the previous post I showed how the rscala package (which has replaced the jvmr package) can be used to call Scala code from within R. In this post I will show how to call R from Scala code. I have previously described how to do this using jvmr. This post is really just an update to show how things work with rscala.

Since I’m focusing here on Scala sbt projects, I’m assuming that sbt is installed, in addition to rscala (described in the previous post). The only “trick” required for calling back to R from Scala is telling sbt where the rscala jar file is located. You can find the location from the R console as illustrated by the following session:

> library(rscala)
> rscala::rscalaJar("2.11")
[1] "/home/ndjw1/R/x86_64-pc-linux-gnu-library/3.2/rscala/java/rscala_2.11-1.0.6.jar"

This location (which will obviously be different for you) can then be added in to your sbt classpath by adding the following line to your build.sbt file:

unmanagedJars in Compile += file("/home/ndjw1/R/x86_64-pc-linux-gnu-library/3.2/rscala/java/rscala_2.11-1.0.6.jar")

Once this is done, calling out to R from your Scala sbt project can be carried out as described in the rscala documentation. For completeness, a working example is given below.

Example

In this example I will use Scala to simulate some data consistent with a Poisson regression model, and then push the data to R to fit it using the R function glm(), and then pull back the fitted regression coefficients into Scala. This is obviously a very artificial example, but the point is to show how it is possible to call back to R for some statistical procedure that may be “missing” from Scala.

The dependencies for this project are described in the file build.sbt

name := "rscala test"

version := "0.1"

scalacOptions ++= Seq("-unchecked", "-deprecation", "-feature")

libraryDependencies  ++= Seq(
            "org.scalanlp" %% "breeze" % "0.10",
            "org.scalanlp" %% "breeze-natives" % "0.10"
)

resolvers ++= Seq(
            "Sonatype Snapshots" at "https://oss.sonatype.org/content/repositories/snapshots/",
            "Sonatype Releases" at "https://oss.sonatype.org/content/repositories/releases/"
)

unmanagedJars in Compile += file("/home/ndjw1/R/x86_64-pc-linux-gnu-library/3.2/rscala/java/rscala_2.11-1.0.6.jar")

scalaVersion := "2.11.6"

The complete Scala program is contained in the file PoisReg.scala

import org.ddahl.rscala.callback._
import breeze.stats.distributions._
import breeze.linalg._

object ScalaToRTest {

  def main(args: Array[String]) = {

    // first simulate some data consistent with a Poisson regression model
    val x = Uniform(50,60).sample(1000)
    val eta = x map { xi => (xi * 0.1) - 3 }
    val mu = eta map { math.exp(_) }
    val y = mu map { Poisson(_).draw }
    
    // call to R to fit the Poission regression model
    val R = RClient() // initialise an R interpreter
    R.x=x.toArray // send x to R
    R.y=y.toArray // send y to R
    R.eval("mod <- glm(y~x,family=poisson())") // fit the model in R
    // pull the fitted coefficents back into scala
    val beta = DenseVector[Double](R.evalD1("mod$coefficients"))

    // print the fitted coefficents
    println(beta)

  }

}

If these two files are put in an empty directory, the code can be compiled and run by typing sbt run from the command prompt in the relevant directory. The commented code should be self-explanatory, but see the rscala documentation for further details. In particular, the rscala scaladoc is useful.