Calling Scala code from R using rscala

Introduction

In a previous post I looked at how to call Scala code from R using a CRAN package called jvmr. This package now seems to have been replaced by a new package called rscala. Like the old package, it requires a pre-existing Java installation. Unlike the old package, however, it no longer depends on rJava, which may simplify some installations. The rscala package is well documented, with a reference manual and a draft paper. In this post I will concentrate on the issue of calling sbt-based projects with dependencies on external libraries (such as breeze).

On a system with Java installed, it should be possible to install the rscala package with a simple

install.packages("rscala")

from the R command prompt. Calling

library(rscala)

will check that it has worked. The package will do a sensible search for a Scala installation and use it if it can find one. If it can’t find one (or can only find an installation older than 2.10.x), it will fail. In this case you can download and install a Scala installation specifically for rscala using the command

rscala::scalaInstall()

This option is likely to be attractive to sbt (or IDE) users who don’t like to rely on a system-wide scala installation.

A Gibbs sampler in Scala using Breeze

For illustration I’m going to use a Scala implementation of a Gibbs sampler. The Scala code, gibbs.scala is given below:

package gibbs

object Gibbs {

    import scala.annotation.tailrec
    import scala.math.sqrt
    import breeze.stats.distributions.{Gamma,Gaussian}

    case class State(x: Double, y: Double) {
      override def toString: String = x.toString + " , " + y + "\n"
    }

    def nextIter(s: State): State = {
      val newX = Gamma(3.0, 1.0/((s.y)*(s.y)+4.0)).draw
      State(newX, Gaussian(1.0/(newX+1), 1.0/sqrt(2*newX+2)).draw)
    }

    @tailrec def nextThinnedIter(s: State,left: Int): State =
      if (left==0) s else nextThinnedIter(nextIter(s),left-1)

    def genIters(s: State, stop: Int, thin: Int): List[State] = {
      @tailrec def go(s: State, left: Int, acc: List[State]): List[State] =
        if (left>0)
          go(nextThinnedIter(s,thin), left-1, s::acc)
          else acc
      go(s,stop,Nil).reverse
    }

    def main(args: Array[String]) = {
      if (args.length != 3) {
        println("Usage: sbt \"run <outFile> <iters> <thin>\"")
        sys.exit(1)
      } else {
        val outF=args(0)
        val iters=args(1).toInt
        val thin=args(2).toInt
        val out = genIters(State(0.0,0.0),iters,thin)
        val s = new java.io.FileWriter(outF)
        s.write("x , y\n")
        out map { it => s.write(it.toString) }
        s.close
      }
    }

}

This code requires Scala and the Breeze scientific library in order to build. We can specify this in a sbt build file, which should be called build.sbt and placed in the same directory as the Scala code.

name := "gibbs"

version := "0.1"

scalacOptions ++= Seq("-unchecked", "-deprecation", "-feature")

libraryDependencies  ++= Seq(
            "org.scalanlp" %% "breeze" % "0.10",
            "org.scalanlp" %% "breeze-natives" % "0.10"
)

resolvers ++= Seq(
            "Sonatype Snapshots" at "https://oss.sonatype.org/content/repositories/snapshots/",
            "Sonatype Releases" at "https://oss.sonatype.org/content/repositories/releases/"
)

scalaVersion := "2.11.6"

Now, from a system command prompt in the directory where the files are situated, it should be possible to download all dependencies and compile and run the code with a simple

sbt "run output.csv 50000 1000"

sbt magically manages all of the dependencies for us so that we don’t have to worry about them. However, for calling from R, it may be desirable to run the code without running sbt. There are several ways to achieve this, but the simplest is to build an “assembly jar” or “fat jar”, which is a Java byte-code file containing all code and libraries required in order to run the code on any system with a Java installation.

To build an assembly jar first create a subdirectory called project (the name matters), an in it place two files. The first should be called assembly.sbt, and should contain the line

addSbtPlugin("com.eed3si9n" % "sbt-assembly" % "0.13.0")

Since the version of the assembly tool can depend on the version of sbt, it is also best to fix the version of sbt being used by creating another file in the project directory called build.properties, which should contain the line

sbt.version=0.13.7

Now return to the parent directory and run

sbt assembly

If this works, it should create a fat jar target/scala-2.11/gibbs-assembly-0.1.jar. You can check it works by running

java -jar target/scala-2.11/gibbs-assembly-0.1.jar output.csv 10000 10

Assuming that it does, you are now ready to try running the code from within R.

Calling via R system calls

Since this code takes a relatively long time to run, calling it from R via simple system calls isn’t a particularly terrible idea. For example, we can do this from the R command prompt with the following commands

system("java -jar target/scala-2.11/gibbs-assembly-0.1.jar output.csv 50000 1000")
out=read.csv("output.csv")
library(smfsb)
mcmcSummary(out,rows=2)

This works fine, but is a bit clunky. Tighter integration between R and Scala would be useful, which is where rscala comes in.

Calling assembly Scala projects via rscala

rscala provides a very simple way to embed a Scala interpreter within an R session, to be able to execute Scala expressions from R and to have the results returned back to the R session for further processing. The main issue with using this in practice is managing dependencies on external libraries and setting the Scala classpath correctly. By using an assembly jar we can bypass most of these issues, and it becomes trivial to call our Scala code direct from the R interpreter, as the following code illustrates.

library(rscala)
sc=scalaInterpreter("target/scala-2.11/gibbs-assembly-0.1.jar")
sc%~%'import gibbs.Gibbs._'
out=sc%~%'genIters(State(0.0,0.0),50000,1000).toArray.map{s=>Array(s.x,s.y)}'
library(smfsb)
mcmcSummary(out,rows=2)

Here we call the getIters function directly, rather than via the main method. This function returns an immutable List of States. Since R doesn’t understand this, we map it to an Array of Arrays, which R then unpacks into an R matrix for us to store in the matrix out.

Summary

The CRAN package rscala makes it very easy to embed a Scala interpreter within an R session. However, for most non-trivial statistical computing problems, the Scala code will have dependence on external scientific libraries such as Breeze. The standard way to easily manage external dependencies in the Scala ecosystem is sbt. Given an sbt-based Scala project, it is easy to generate an assembly jar in order to initialise the rscala Scala interpreter with the classpath needed to call arbitrary Scala functions. This provides very convenient inter-operability between R and Scala for many statistical computing applications.

Advertisements

Calling R from Scala sbt projects

[Update: The jvmr package has been replaced by the rscala package. There is a new version of this post which replaces this one.]

Overview

In previous posts I’ve shown how the jvmr CRAN R package can be used to call Scala sbt projects from R and inline Scala Breeze code in R. In this post I will show how to call to R from a Scala sbt project. This requires that R and the jvmr CRAN R package are installed on your system, as described in the previous posts. Since I’m focusing here on Scala sbt projects, I’m also assuming that sbt is installed.

The only “trick” required for calling back to R from Scala is telling sbt where the jvmr jar file is located. You can find the location from the R console as illustrated by the following session:

&gt; library(jvmr)
&gt; .jvmr.jar
[1] "/home/ndjw1/R/x86_64-pc-linux-gnu-library/3.1/jvmr/java/jvmr_2.11-2.11.2.1.jar"

This location (which will obviously be different for you) can then be added in to your sbt classpath by adding the following line to your build.sbt file:

unmanagedJars in Compile += file("/home/ndjw1/R/x86_64-pc-linux-gnu-library/3.1/jvmr/java/jvmr_2.11-2.11.2.1.jar")

Once this is done, calling out to R from your Scala sbt project can be carried out as described in the jvmr documentation. For completeness, a working example is given below.

Example

In this example I will use Scala to simulate some data consistent with a Poisson regression model, and then push the data to R to fit it using the R function glm(), and then pull back the fitted regression coefficients into Scala. This is obviously a very artificial example, but the point is to show how it is possible to call back to R for some statistical procedure that may be “missing” from Scala.

The dependencies for this project are described in the file build.sbt

name := "jvmr test"

version := "0.1"

scalacOptions ++= Seq("-unchecked", "-deprecation", "-feature")

libraryDependencies  ++= Seq(
            "org.scalanlp" %% "breeze" % "0.10",
            "org.scalanlp" %% "breeze-natives" % "0.10"
)

resolvers ++= Seq(
            "Sonatype Snapshots" at "https://oss.sonatype.org/content/repositories/snapshots/",
            "Sonatype Releases" at "https://oss.sonatype.org/content/repositories/releases/"
)

unmanagedJars in Compile += file("/home/ndjw1/R/x86_64-pc-linux-gnu-library/3.1/jvmr/java/jvmr_2.11-2.11.2.1.jar")

scalaVersion := "2.11.2"

The complete Scala program is contained in the file PoisReg.scala

import org.ddahl.jvmr.RInScala
import breeze.stats.distributions._
import breeze.linalg._

object ScalaToRTest {

  def main(args: Array[String]) = {

    // first simulate some data consistent with a Poisson regression model
    val x = Uniform(50,60).sample(1000)
    val eta = x map { xi =&gt; (xi * 0.1) - 3 }
    val mu = eta map { math.exp(_) }
    val y = mu map { Poisson(_).draw }
    
    // call to R to fit the Poission regression model
    val R = RInScala() // initialise an R interpreter
    R.x=x.toArray // send x to R
    R.y=y.toArray // send y to R
    R.eval("mod &lt;- glm(y~x,family=poisson())") // fit the model in R
    // pull the fitted coefficents back into scala
    val beta = DenseVector[Double](R.toVector[Double]("mod$coefficients"))

    // print the fitted coefficents
    println(beta)

  }

}

If these two files are put in an empty directory, the code can be compiled and run by typing sbt run from the command prompt in the relevant directory. The commented code should be self-explanatory, but see the jvmr documentation for further details.

Inlining Scala Breeze code in R using jvmr and sbt

[Update: The CRAN package “jvmr” has been replaced by a new package “rscala”. Rather than completely re-write this post, I’ve just created a github gist containing a new function, breezeInterpreter(), which works similarly to the function breezeInit() in this post. Usage information is given at the top of the gist.]

Introduction

In the previous post I showed how to call Scala code from R using sbt and jvmr. The approach described in that post is the one I would recommend for any non-trivial piece of Scala code – mixing up code from different languages in the same source code file is not a good strategy in general. That said, for very small snippets of code, it can sometimes be convenient to inline Scala code directly into an R source code file. The canonical example of this is a computationally intensive algorithm being prototyped in R which has a slow inner loop. If the inner loop can be recoded in a few lines of Scala, it would be nice to just inline this directly into the R code without having to create a separate Scala project. The CRAN package jvmr provides a very simple and straightforward way to do this. However, as discussed in the last post, most Scala code for statistical computing (even short and simple code) is likely to rely on Breeze for special functions, probability distributions, non-uniform random number generation, numerical linear algebra, etc. In this post we will see how to use sbt in order to make sure that the Breeze library and all of its dependencies are downloaded and cached, and to provide a correct classpath with which to initialise a jvmr scalaInterpreter session.

Setting up

Configuring your system to be able to inline Scala Breeze code is very easy. You just need to install Java, R and sbt. Then install the CRAN R package jvmr. At this point you have everything you need except for the R function breezeInit, given at the end of this post. I’ve deferred the function to the end of the post as it is a bit ugly, and the details of it are not important. All it does is get sbt to ensure that Breeze is correctly downloaded and cached and then starts a scalaInterpreter with Breeze on the classpath. With this function available, we can use it within an R session as the following R session illustrates:

&gt; b=breezeInit()
&gt; b['import breeze.stats.distributions._']
NULL
&gt; b['Poisson(10).sample(20).toArray']
 [1] 13 14 13 10  7  6 15 14  5 10 14 11 15  8 11 12  6  7  5  7
&gt; summary(b['Gamma(3,2).sample(10000).toArray'])
   Min. 1st Qu.  Median    Mean 3rd Qu.    Max. 
 0.2124  3.4630  5.3310  5.9910  7.8390 28.5200 
&gt; 

So we see that Scala Breeze code can be inlined directly into an R session, and if we are careful about return types, have the results of Scala expressions automatically unpack back into convenient R data structures.

Summary

In this post I have shown how easy it is to inline Scala Breeze code into R using sbt in conjunction with the CRAN package jvmr. This has many potential applications, with the most obvious being the desire to recode slow inner loops from R to Scala. This should give performance quite comparable with alternatives such as Rcpp, with the advantage being that you get to write beautiful, elegant, functional Scala code instead of horrible, ugly, imperative C++ code! 😉

The breezeInit function

The actual breezeInit() function is given below. It is a little ugly, but very simple. It is obviously easy to customise for different libraries and library versions as required. All of the hard work is done by sbt which must be installed and on the default system path in order for this function to work.

breezeInit&lt;-function()
{
  library(jvmr)
  sbtStr="name := \"tmp\"

version := \"0.1\"

libraryDependencies  ++= Seq(
            \"org.scalanlp\" %% \"breeze\" % \"0.10\",
            \"org.scalanlp\" %% \"breeze-natives\" % \"0.10\"
)

resolvers ++= Seq(
            \"Sonatype Snapshots\" at \"https://oss.sonatype.org/content/repositories/snapshots/\",
            \"Sonatype Releases\" at \"https://oss.sonatype.org/content/repositories/releases/\"
)

scalaVersion := \"2.11.2\"

lazy val printClasspath = taskKey[Unit](\"Dump classpath\")

printClasspath := {
  (fullClasspath in Runtime value) foreach {
    e =&gt; print(e.data+\"!\")
  }
}
"
  tmps=file(file.path(tempdir(),"build.sbt"),"w")
  cat(sbtStr,file=tmps)
  close(tmps)
  owd=getwd()
  setwd(tempdir())
  cpstr=system2("sbt","printClasspath",stdout=TRUE)
  cpst=cpstr[length(cpstr)]
  cpsp=strsplit(cpst,"!")[[1]]
  cp=cpsp[2:(length(cpsp)-1)]
  si=scalaInterpreter(cp,use.jvmr.class.path=FALSE)
  setwd(owd)
  si
}

Calling Scala code from R using jvmr

[Update: the jvmr package has been replaced by a new package called rscala. I have a new post which explains it.]

Introduction

In previous posts I have explained why I think that Scala is a good language to use for statistical computing and data science. Despite this, R is very convenient for simple exploratory data analysis and visualisation – currently more convenient than Scala. I explained in my recent talk at the RSS what (relatively straightforward) things would need to be developed for Scala in order to make R completely redundant, but for the short term at least, it seems likely that I will need to use both R and Scala for my day-to-day work.

Since I use both Scala and R for statistical computing, it is very convenient to have a degree of interoperability between the two languages. I could call R from Scala code or Scala from R code, or both. Fortunately, some software tools have been developed recently which make this much simpler than it used to be. The software is jvmr, and as explained at the website, it enables calling Java and Scala from R and calling R from Java and Scala. I have previously discussed calling Java from R using the R CRAN package rJava. In this post I will focus on calling Scala from R using the CRAN package jvmr, which depends on rJava. I may examine calling R from Scala in a future post.

On a system with Java installed, it should be possible to install the jvmr R package with a simple

install.packages("jvmr")

from the R command prompt. The package has the usual documentation associated with it, but the draft paper describing the package is the best way to get an overview of its capabilities and a walk-through of simple usage.

A Gibbs sampler in Scala using Breeze

For illustration I’m going to use a Scala implementation of a Gibbs sampler which relies on the Breeze scientific library, and will be built using the simple build tool, sbt. Most non-trivial Scala projects depend on various versions of external libraries, and sbt is an easy way to build even very complex projects trivially on any system with Java installed. You don’t even need to have Scala installed in order to build and run projects using sbt. I give some simple complete worked examples of building and running Scala sbt projects in the github repo associated with my recent RSS talk. Installing sbt is trivial as explained in the repo READMEs.

For this post, the Scala code, gibbs.scala is given below:

package gibbs

object Gibbs {

    import scala.annotation.tailrec
    import scala.math.sqrt
    import breeze.stats.distributions.{Gamma,Gaussian}

    case class State(x: Double, y: Double) {
      override def toString: String = x.toString + " , " + y + "\n"
    }

    def nextIter(s: State): State = {
      val newX = Gamma(3.0, 1.0/((s.y)*(s.y)+4.0)).draw
      State(newX, Gaussian(1.0/(newX+1), 1.0/sqrt(2*newX+2)).draw)
    }

    @tailrec def nextThinnedIter(s: State,left: Int): State =
      if (left==0) s else nextThinnedIter(nextIter(s),left-1)

    def genIters(s: State, stop: Int, thin: Int): List[State] = {
      @tailrec def go(s: State, left: Int, acc: List[State]): List[State] =
        if (left&gt;0)
          go(nextThinnedIter(s,thin), left-1, s::acc)
          else acc
      go(s,stop,Nil).reverse
    }

    def main(args: Array[String]) = {
      if (args.length != 3) {
        println("Usage: sbt \"run &lt;outFile&gt; &lt;iters&gt; &lt;thin&gt;\"")
        sys.exit(1)
      } else {
        val outF=args(0)
        val iters=args(1).toInt
        val thin=args(2).toInt
        val out = genIters(State(0.0,0.0),iters,thin)
        val s = new java.io.FileWriter(outF)
        s.write("x , y\n")
        out map { it =&gt; s.write(it.toString) }
        s.close
      }
    }

}

This code requires Scala and the Breeze scientific library in order to build. We can specify this in a sbt build file, which should be called build.sbt and placed in the same directory as the Scala code.

name := "gibbs"

version := "0.1"

scalacOptions ++= Seq("-unchecked", "-deprecation", "-feature")

libraryDependencies  ++= Seq(
            "org.scalanlp" %% "breeze" % "0.10",
            "org.scalanlp" %% "breeze-natives" % "0.10"
)

resolvers ++= Seq(
            "Sonatype Snapshots" at "https://oss.sonatype.org/content/repositories/snapshots/",
            "Sonatype Releases" at "https://oss.sonatype.org/content/repositories/releases/"
)

scalaVersion := "2.11.2"

Now, from a system command prompt in the directory where the files are situated, it should be possible to download all dependencies and compile and run the code with a simple

sbt "run output.csv 50000 1000"

Calling via R system calls

Since this code takes a relatively long time to run, calling it from R via simple system calls isn’t a particularly terrible idea. For example, we can do this from the R command prompt with the following commands

system("sbt \"run output.csv 50000 1000\"")
out=read.csv("output.csv")
library(smfsb)
mcmcSummary(out,rows=2)

This works fine, but won’t work so well for code which needs to be called repeatedly. For this, tighter integration between R and Scala would be useful, which is where jvmr comes in.

Calling sbt-based Scala projects via jvmr

jvmr provides a very simple way to embed a Scala interpreter within an R session, to be able to execute Scala expressions from R and to have the results returned back to the R session for further processing. The main issue with using this in practice is managing dependencies on external libraries and setting the Scala classpath correctly. For an sbt project such as we are considering here, it is relatively easy to get sbt to provide us with all of the information we need in a fully automated way.

First, we need to add a new task to our sbt build instructions, which will output the full classpath in a way that is easy to parse from R. Just add the following to the end of the file build.sbt:

lazy val printClasspath = taskKey[Unit]("Dump classpath")

printClasspath := {
  (fullClasspath in Runtime value) foreach {
    e =&gt; print(e.data+"!")
  }
}

Be aware that blank lines are significant in sbt build files. Once we have this in our build file, we can write a small R function to get the classpath from sbt and then initialise a jvmr scalaInterpreter with the correct full classpath needed for the project. An R function which does this, sbtInit(), is given below

sbtInit&lt;-function()
{
  library(jvmr)
  system2("sbt","compile")
  cpstr=system2("sbt","printClasspath",stdout=TRUE)
  cpst=cpstr[length(cpstr)]
  cpsp=strsplit(cpst,"!")[[1]]
  cp=cpsp[1:(length(cpsp)-1)]
  scalaInterpreter(cp,use.jvmr.class.path=FALSE)
}

With this function at our disposal, it becomes trivial to call our Scala code direct from the R interpreter, as the following code illustrates.

sc=sbtInit()
sc['import gibbs.Gibbs._']
out=sc['genIters(State(0.0,0.0),50000,1000).toArray.map{s=&gt;Array(s.x,s.y)}']
library(smfsb)
mcmcSummary(out,rows=2)

Here we call the getIters function directly, rather than via the main method. This function returns an immutable List of States. Since R doesn’t understand this, we map it to an Array of Arrays, which R then unpacks into an R matrix for us to store in the matrix out.

Summary

The CRAN package jvmr makes it very easy to embed a Scala interpreter within an R session. However, for most non-trivial statistical computing problems, the Scala code will have dependence on external scientific libraries such as Breeze. The standard way to easily manage external dependencies in the Scala ecosystem is sbt. Given an sbt-based Scala project, it is easy to add a task to the sbt build file and a function to R in order to initialise the jvmr Scala interpreter with the full classpath needed to call arbitrary Scala functions. This provides very convenient inter-operability between R and Scala for many statistical computing applications.